Filter
Top Products
Connections
20
1
If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the
rear of the Blu-ray Disc Player to the
DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier. If
using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL) terminal on the
rear of the Blu-ray Disc Player to the
DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT
terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN
terminal of your TV as described on pages 14 to 17.
3
Turn on the Blu-ray Disc Player, TV and Amplifier.
4
Press the input select button of the Amplifier to select the external input in order to hear sound from
the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Connecting to an AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER)
OR
Back of the player
Amplifier
NOTE
• The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your
Amplifier.
• When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the front two
channels.
BDP-6003-English 2008.12.5 6:19 PM ˘ `20