Filter
Top Products
ENGLISH
16
1. Before operation, enter the standby mode.
2. In the standby mode, turn the power on.
Operations
• The POWER ON/STANDBY indicator lights up amber.
This means that the unit is connected to the AC mains
and a small amount of current is retained to support
operational readiness.
• To turn the power completely off, press the POWER
switch again.
• Each time the POWER ON/STANDBY button on the
front panel is pressed, the unit is turned on to enter the
operating mode (the POWER ON/STANDBY indicator
lights up blue) or off to enter the standby mode.
• On the remote control, press the POWER ON button to
enter the operating mode or press the STANDBY
button to enter the standby mode.
• When the Optical Disc Autoplay is set to On (default
setting), playback will automatically start. (For details,
refer to “Optical Disc AutoPlay” on page 29.)
Should this happen, ignore the step 4.
• Then playback will start.
• For some discs, the menu may be displayed first.
Example :
JPEG file
Video file
System Settings
Loaded disc
Music file
PLAYING A DISc
■Before starting playback
• First set this unit as desired for optimum performance, doing the system setting procedures. (For details, refer to "System
Settings" on page 28.)
• For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English.
• Usable discs and files for each operation/function are referred to by the icons :
3. Open the disc tray to load a disc with the printed
side up.
4. Press the CURSOR UP/DOWN buttons to select
the disc, then press the OK button. (When the
Optical Disc AutoPlay is se to Off.)
• 8 cm (3 inch) discs can be loaded on the inside circle of
the tray, too.
• Depending on the disc types, it may take times to read
the loaded disc.
• Then the main menu will be displayed on the TV
screen.
means AVI and WMV files.
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 16