Filter
Top Products
English
2
TRANSMITTER FEATURES
1
10
3
2
7
6
4
5
9
11
8
AXB1/AXB1G
Bodypack
AXB1G
9
FIGURE 2. AXB1, AXB1G, AND AXB11 BODYPACK TRANSMITTER FEATURES
1. Battery Compartment. Holds one 9V alkaline battery.
2. Antenna. For best operation, the antenna
must
hang verti-
cally, and should not be coiled or bundled.
3. Belt Clip. Secures the transmitter to a belt, waistband or gui-
tar strap.
4. Power On Indicator. Glows green when transmitter is pow-
ered on.
5. Power Switch. Recessed to prevent accidental turn-off.
6. Mute Switch. Slide to ON for normal operation. Slide to
MUTE to prevent sounds from being transmitted to the re-
ceiver
. Muting the transmitter does not turn off transmitter
power.
7. Low Battery Indicator. Glows red when one hour or less of
operating time remains and transmitter battery should be
changed.
8. Audio Gain Control. Provides audio level adjustment to ac-
commodate different sound sources (e.g., speaking or play-
ing an instrument). A small screwdriver is supplied to make
adjustments.
9. Input Connector. AXB1: Tini Q-G
R
connector provides
connection to a variety of lavalier and headset microphone
cables and to the Shure WA302 instrument adapter cable.
AXB1G: Accepts a standard 1/4 inch or guitar cable plug.
10. Lavalier Microphone. WL93 omnidirectional condenser
microphone supplied with a mount that clips onto a tie, lapel,
or acoustic instrument.
11. Cables. AXB1G: 1/4 inch to 1/4 inch guitar cable for electric
guitar or other electric instruments.
4
1
2
3
7
5
6
FIGURE 3. AXH2 MICROPHONE-TRANSMITTER FEATURES
1. Power Switch. Recessed to prevent accidental turn-off.
2. Power On Indicator. Glows green when power is on.
3. Low Battery Indicator. Glows red when one hour or less of
operating time remains and battery should be changed.
4. Mute Switch. Slide to ON for normal operation. Slide to
MUTE to prevent sounds from being transmitted to the re-
ceiver.
Muting the transmitter does not turn off power
.
5. Audio Gain Control. Allows you to adjust the transmitter to
match the loudness of your vocals. A small screwdriver is
supplied to make adjustments.
6. 9V Alkaline Battery (shown installed). Provides power to
the microphone-transmitter.
7. Battery Cover. Unscrews for access to the 9V alkaline bat-
tery and gain control.