AG
BH
CI
DJ
EK
FL
M
(×4) M8 Spacer
(×4) M8×35 screw
(×4) M4×12 screw
When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is
recommended that the wood studs be a minimum of 16" apart.
(×6) M8 concrete anchor
(×4) M4×35 screw (×6) M8 Washer
(×4) M6×16 screw (×6) M8x80 Bolt
(×4) M8×16 screw
INSTALLATION AND OPERATING INSTRUCTIONS
(×4) M6×35 screw
(×4) M8/M6/M5 Washer
(×4) M4×16 screw
(×4) M5×16 screw
Caution
Hardware kit:
It is recommendedthat two peopleperform the installation. Injury and/or damagecan result from dropping or mishandling
the display.
CAUTION: The maximum load capacity is 165 lbs. Use with products exceedingthe maximum load capacity may cause
serious injury. See apparatus instructions.
The wallstructure must be capableof supporting at least the maximumloadcapacity as indicated. If not, the wall must be
reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in the installation
instructions, must be adhered to. Failure to do so could result in serious personal injury.
Do not installnear heater,fireplace,air conditioning,in direct sunlight, or any other heatproducing source. Failureto do so
may result in damage to the display and could increase the risk of fire.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in
damage to the display and/or damage to the mounting surface.
Recommendedmounting surfaces: wood stud and solid-flat concrete. If the mount is to be installedon any surface other
than wood studs, use suitable hardware (not included but commercially available).
Prior to the installation of this product, the installation instructions should be read and completely understood. The
installationinstructions must be read to prevent personal injury and property damage. Keep these installationinstructions
in an easily accessible location for future reference.
2