Filter
Top Products
Language
Selects the desired OSD language. The Nero 3D can display the menus in English, Itali-
an, French, German, Spanish, Swedish, Portuguese, Russian and Simplified Chinese.
Source List
Allows customization of the Input list. To change the status of an input:
1. highlight the input
2. use the ◂ and ▸ keys to Enable or Disable the input.
Disabled inputs are not shown in the input selection menu and cannot be selected via
keys 1-5 of the remote control.
Important: Active inputs are numbered according to their position in the list. Chan-
ging the status of an input modifies the numbers assigned to the inputs that follow
(which is undesirable if you are using a custom control system).
You can change the label of each input (for example assigning the name of the device
it is connected to). To rename an input:
1. highlight the input
2. press ● on the remote control to enter Text Entry menu
3. use the ◂ and ▸ keys to underline the character you would like to change
4. enter the desired symbol using keys 1-9 on the remote control
5. cycle through steps 3 and 4 until you have finished entering your custom label
6. press ● on the remote control to save the label you have entered, or Esc to
discard your changes
F1-F2 Keys
You can have direct access to some functions through the F1 and F2 keys on the re-
mote control.
The default assignments are: F1 = Zoom, F2 = Focus.
To assign a different function to one of these keys:
1. highlight the function using ▴ or ▾
2. press F1 or F2 to set the key assigned to that function.
Available functions are:
• Zoom Activates the optical zoom control, where the ◂ and ▸ keys zoom out
and in respectively. By pressing ● on the remote control a specific internal test
pattern is displayed. This is the default function for key F1.
• Focus Once selected, ◂ and ▸ allow the image to be focused. By pressing ● on
the remote control a pattern a specific internal test pattern is displayed. This
is the default function for key F2.
• Blank Turns off the video signal on-screen. Press Esc to restore video to the
screen.
• Gamma correction Activates Gamma Correction quick menu. Use ▴ or ▾ to
cycle through available Gamma tables.
• Freeze Turns on or off picture still mode.
Source Information
When enabled (Yes), the projector displays information about the current input signal
every time a new signal is detected. If disabled (No) no information is displayed.
4 Operation Nero 3D
User Guide
31