![](http://pdfasset.owneriq.net/b/50/b50ef063-7bbe-4724-af19-9ac3aca1171f/b50ef063-7bbe-4724-af19-9ac3aca1171f-bg23.png)
Sharpness, Filter and Noise Reduction will appear on after the other in the lower part
of the screen by pressing ▴ or ▾.
Messages
The following messages may appear on your screen:
• No signal. The projector does not recognize any signal applied to the selected
input. In this case:
◦ make sure the selected input is connected to a video or graphic signal and
that this source is functioning correctly.
◦ check the condition of the cables used to connect the system to the vari-
ous sources.
◦ make sure the video or graphic signals supplied by the source are compat-
ible with the system technical specifications and, in particular, with those
of the selected input.
• Out of range. This message appears when either the resolution or the vertic-
al/horizontal frequency of the input signal exceeds system specifications (for
example a QXGA graphic signal).
4 Operation Nero 3D
User Guide
35