Filter
Top Products
SUR-47 User’s Manual Specifications
11
Deleting Devices
Follow these instructions to delete a device configuration including the LCD display and codes.
1. Press or to select
DELETE
.
2. Press
.
3. Press the device key you want to
delete (for example TV).
4. Press
to delete the device. You
are prompted to confirm the
deletion.
5. Press
to confirm the deletion.
Press EXIT to cancel the deletion.
6. Press Exit
to exit the setup menu.
Code Menu
Enter the setup menus, scroll to Code and press to enter the code menu. In the code menu, press and
to scroll through the code menu options:
• Pre-Code - use this method to automatically configure all buttons on the SUR-47 for use with a specific
manufacture model number. This feature is the fastest way to program the SUR-47 but requires that your
device be located in the Pre-programmed Code List that was bundled with the SUR-47. Some newer or
less-common devices may not be pre-programmed and must be learned using the Learning Function.
• Learn - use this method to directly learn the proper infrared signals from another remote control. This
method is perfect for newer or less common devices or if a certain button still does not perform the
desired function after using pre-programmed manufacturer codes; however, not 100% of codes can be
learned and it may be necessary to collect unrecognized codes and send them to Sima Products. (See
page 17 for more information on unrecognized code collection.)
• Del Key - erases the key code
• Del Bank - erases the device code
• Debug - collects unrecognizable (un-learnable) infrared codes for debugging purposes