Smart Technologies UF55 CRT Television User Manual


  Open as PDF
of 58
 
English 42
Appendices
Appendices
Image Problems
No image appears on-screen
Ensure that all the cables and power connections are correctly and
securely connected as described in the “Installation” section on
page 1
0.
Ensure that all of the pins on the connectors are not bent or broken.
Make sure if the projection lamp has been securely installed.
Make sure the projector is turned on.
Ensure that the Hide Display feature on the remote is disabled.
Partial,scrollingorincorrectlydisplayedimage
If you are using a desktop computer:
For computers running the Windows
®
95,Windows
®
98,
Windows
®
2000,orWindows
®
XP operating system:
1. Click
My Computer → Control Panel,andthendouble-click
Display.
2. Select the
Settings tab.
3.Verifythatyourdisplayresolutionsettingislowerthanorequal
to UXGA (1600 × 1200).
Iftheprojectorisstillnotprojectingthewholeimage,youwillalso
need to change the monitor display you are using. Refer to the
following steps.
4. Click
Advanced Properties.
Troubleshooting
If you experience a problem with your projector,
please refer to the following information. If a
problem persists, please contact your local
reseller or service center.
 previous next