Sony 32EX72X Flat Panel Television User Manual


 
28
GB
Installing the Accessories (Wall-Mount Bracket)
To Customers:
When using the SU-WL500 and SU-WL100 Wall-Mount Bracket, the space between the wall and
the TV will be 6 cm. Use this space to route cables to the TV.
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500 (page 29) and SU-WL100 (page 29) Wall-Mount
Bracket (sold separately).
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
Refer to “Detaching the Table-Top Stand from the TV” (page 9).
When installing the TV on the wall, remove the screws from the rear of the TV. The screws and
number of screws are available depending on the TV model. (They are fastened in the screw holes
for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from
children.
~
When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is
larger than the TV.
To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface.
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
6cm
Wall
×
2
×
2
B For KDL-46/40HX72x, KDL-46/40/37/
32EX72x, KDL-46/40/37/32EX52x,
KDL-32EX42x
×
2
×
4
B For KDL-55EX72x
Soft cloth
Soft cloth