Filter
Top Products
29
GB
Using Home Network Features
Adjusting the Server
Display Settings
You can select home network servers to be
displayed on the Home Menu.
Up to 10 servers can be displayed on the Home
Menu automatically.
1 Set the server to allow connections from
the TV.
For details on settings on the server, refer
to the Operating Instructions supplied
with the server.
2 Press HOME.
3 Press G/g to select “Settings.”
4 Press F/f to select “Network Settings,”
then press .
5 Select “Server Display Settings,” then
press .
6 Select the server you want to display on
the Home Menu, then press .
7 Select “Yes,” then press .
If you cannot connect to your home
network
The TV can check if the server is being
correctly recognised.
1 Press HOME.
2 Press G/g to select “Settings.”
3 Press F/f to select “Network Settings,”
then press .
4 Select “Server Diagnostics,” then press .
5 Select “Yes,” then press .
The server diagnostic starts.
When the server diagnostic is complete,
the diagnostic result list appears.
6 Select the server you want to confirm,
then press .
The diagnostic results of the selected
server appear.
z
• If the diagnostic results indicate a failure, look up
the possible causes and what to do, and check
connections and settings.
For details, see “Troubleshooting” (page 49).