Filter
Top Products
31
GB
Using Menu Functions
TV Settings Menu
Used to update the TV’s system software in the future.
System Update
Clock/Timers
Sleep Timer Sets the TV to automatically switch to standby mode after a certain amount of
time.
When “Sleep Timer” is activated, the (Timer) indicator on the TV front panel
lights up in orange.
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off.”
On Timer Sets the TV to automatically turn on from standby mode.
Auto Clock Update Switches to digital mode and obtains the time.
Clock Set Allows you to adjust the clock manually.
~
• When the TV is receiving digital channels, you cannot adjust the clock manually,
because the clock automatically receives the time code from the broadcast signal.
Eco
Reset Resets all the “Eco” settings to the factory settings.
Power Saving Reduces power consumption of the TV by adjusting the backlight.
When you select “Picture Off,” the picture is switched off, and the (Picture Off)
indicator on the TV front panel lights up in green. The sound remains unchanged.
Idle TV Standby Turns the TV off after it has been kept idle for the preset length of time.
PC Power
Management
Switches the TV to standby mode when the TV receives no signal from the PC
input source for 30 seconds.
Light Sensor Automatically optimises the picture settings according to the ambient light in the
room.
~
• Do not put anything over the sensor, doing so may affect its function. See page 14
to check the position of the sensor.
Picture
Target Inputs Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which “Target
Inputs” is set to “Common.”
(Continued)