Filter
Top Products
[85] How to Use Using the Wi-Fi function Controlling other cameras through this
product
Connecting this product to more than one camera with
Multi Camera Control (Multi Connection)
You can connect this product with other cameras via Wi-Fi. By connecting via Wi-Fi, you can
control other cameras with this product.
1. Turn on the power of the cameras you want to connect and set them in a state ready for
Wi-Fi connection.
For details on the operation, refer to the instructions manual of the cameras.
2. Turn on this product, then select - [Wireless] - [ Setting] - [Multi Camera Ctrl
Set] - [Multi Connection].
3. Select - [Wireless] - [ Function] - [Multi Camera Control].
4. Select .
5. Select [Connect Device Reg].
This product enters registration waiting status (registration waiting status ends in
about 2 minutes).
6. Perform connecting operation on the camera you want to connect with this product.
For details on the Wi-Fi connection, refer to the instruction manuals of the cameras.
7. Select [OK] when it is displayed on the screen of the product to finish the registration.
8. Repeat steps 4 to 7 for each camera you want to connect.
Note
A maximum of five cameras (compatible with Multi Camera Control) can be registered to
this product.
The operations in step 4 - 8 are necessary only for the first-time registration.
Change the settings of the camera you want to connect to before the registration waiting
status of this product ends.
This product displays a character string deleting “DIRECT-“ from the SSID of the camera
you want to connect to as the SSID of the camera.