Filter
Top Products
23
GB
Getting Started
• To connect the system to your network, you need to make network settings that suit your usage environment and
components. For details, see “Setting up the Network” (page 56) and “[Network Settings]” (page 66).
For BDV-L800/BDV-L800M
Select the method based on your LAN (Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you can connect the system to the network by making the network
settings.
• If you use other than a wireless LAN
Connect to the network by making a LAN cable connection as follows.
• The placement distance between the main unit and your wireless LAN router differs based on your usage
environment. If the system cannot connect to the network or the network connection is unstable, place the main unit
and the wireless LAN router closer to each other. When you cannot place the main unit and the wireless LAN router
closer to each other, use the optional USB Wireless LAN Adapter (Sony UWA-BR100* only).
• To connect to a wireless LAN using a 5 GHz frequency band, you need the optional USB Wireless LAN Adapter
(Sony UWA-BR100* only).
* As of March 2011. The USB Wireless LAN Adapter may not be available in some regions/countries.
• You can also get information for network settings from the following Sony support page:
For customers in Europe:
http://support.sony-europe.com
For customers in other countries/regions:
http://www.sony-asia.com/support
Connecting to the network
ADSL modem/
cable modem
Broadband router
LAN cable
(not supplied)
Internet
Rear panel of the main unit