Filter
Top Products
39
GB
Using Optional Equipment
Connecting optional equipment
Using Optional Equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (side)
S VHS/Hi8/DVC
camcorder
Headphones
DVD player
with component
output
For service use only
To connect Do this
DVD player with
component output
A
Connect to the component Y, PB/
C
B, PR/CR sockets 7 and
audio L (MONO), R sockets 7.
S VHS/Hi8/DVC
camcorder B
Connect to the S video socket
7 or the video socket 7,
and the audio sockets 7. To
avoid picture noise, do not connect
the camcorder to the video socket
7 and the S video socket
7 at the same time. If you
connect mono equipment, connect
to the L socket 7.
Tip
You can select the input signal by
setting “AV7 Input” in the “AV Set-
up” menu (page 31).
Headphones C Connect to the i socket to listen to
sound from the TV on headphones.
Conditional Access
Module (CAM) D
To use Pay Per View services. For
details, refer to the instruction
manual supplied with your CAM.
To use the CAM, press the eject
button and remove the “dummy”
card. Switch off the TV when
inserting your CAM into the CAM
slot. When you do not use the
CAM, we recommend that the
“dummy” card be inserted and
kept in the CAM slot.
Note
CAM is not supported in all
countries. Check with your
authorized dealer.
Continued