Sony DVP-NS405 DVD Player User Manual


 
19
Hookups
A If you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to
be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP”
in the Setup Display (page 60), use a SCART (EURO AV) cord that conforms to each signal.
B If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
C If you are connecting to an S VIDEO input jack (DVP-NS405/NS410 only)
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen. If your TV only has one audio/video input jack, connect the player to this jack.
When you connect the player to your TV via the SCART (EURO AV) jack, the TV’s input source is set to
the player automatically when you start playback or press any button except for \/1. In this case, press TV/
DVD on the remote to return the input to the TV.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
When you play a disc recorded in the NTSC colour system, the player outputs the video
signal or the Setup Display etc. in the NTSC colour system and the picture may not appear
on the PAL colour system televisions. In this case, open the tray and remove the disc.
VCR
CD/DVD player
TV
Connect
directly