27
Hookups
15Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 63).
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
Refer to page 58 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 62)
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 62)
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 62)
• Set “DIGITAL OUT” to “ON” (page 62)
B D
A
B-1
C-1
B-2 C-2 D