Filter
Top Products
56
4 Press ENTER.
The selected character is input.
5 Repeat steps 3 and 4 to input other
characters.
6 When you have entered all of the
characters for the Disc Memo or folder
name, press TOP MENU/EDIT.
The “DISC MEMO INPUT” display or
the “FOLDER NAME INPUT” display
disappears and the Disc Memo or folder
name is stored.
To cancel the edit mode
Press ORETURN until disappears
from the Disc Explorer.
If you press
ORETURN again, the Disc
Explorer turns off.
To erase a character
1 In step 3 of “Labeling a disc or folder”
(page 55), press
. or > to move
the cursor to the character you want to
erase.
2 Press CLEAR.
To insert or overwrite a character
1 In step 3 of “Labeling a disc or folder”
(page 55), press
. or > to move
the cursor to the insertion point or the
character you want to correct.
2 Press C/X/x/c to select the correct
character.
3 Perform the following.
◆ To insert the character
Press ENTER.
◆ To overwrite the character
Press
> or . and move the cursor.
z Hint
To display disc information on a hybrid Super
Audio CD (page 101), play the disc once and press
FOLDER.
Notes
• You can label up to 400 discs. When you store the
40lst disc in memory, the data for the lst disc is
erased.
• You cannot enter Disc Memo on Super Audio
CDs (including hybrid discs). However, HD
layers on most Super Audio CDs contain text
information that you can display using the Disc
Explorer. See the hint above.
Labeling a disc or folder using a
keyboard
To label the disc or folder, you can use a USA
model IBM compatible PC keyboard* (not
supplied).
* Power consumption must be 120mA or less.
1 Connect a keyboard to the KEYBOARD
jack on the front panel when the player
is in standby mode.
2 Press [/1 to turn on the player.
3 Perform steps 1 and 2 of “Labeling a
disc or folder” (page 55).
4 Input the characters on the keyboard.
DISC MEMO INPUT
B
ALL DVD CD A B C D
2
Music Madness
BRAHMS SYMPHONY4
4
23
CD
CD
CD
Classical
The entered Disc Memo
EDIT
KEYBOARD jack
[/1