Filter
Top Products
70
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD
VIDEO. Depending on the DVD VIDEO, the
number of the recorded channels may differ.
* “PCM,” “DTS,” or “DOLBY DIGITAL” is
displayed.
The channels in the currently selected track
are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
**The letters in the program format display
indicate the following sound components:
L: Front (left)
R: Front (right)
C: Center
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
z Hint
When playing Dolby Digital and DTS sound tracks,
“LFE” is enclosed in a dotted line when the LFE
signal is not being output.
SURROUND Mode
Settings
You can enjoy surround sounds while playing
discs, including Dolby Digital and DTS
DVDs, even if you have only 2 or 4 speakers.
Select the surround mode that best suits your
speaker setup.
1 Press SUR during playback.
The following display appears.
2 Press SUR repeatedly to select
one of the surround modes.
See the following explanations given for
each item.
◆ For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
DVD
1: ENGLISH
1 8
(
3 4
)
1 2
(
2 7
)
T
1 : 3 2 : 5 5
LRC
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
LFE
LS RS
PLAY
1 2 3
ALL
Current audio format*
Currently playing program format**
DOLBY DIGITAL
3 / 2 . 1
LFE (Low
Frequency
Effect)
component 1
Rear component 2
Front component 2 +
Center component 1
SUR
TVS DYNAMIC