Filter
Top Products
25
Hookups
6 Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
7 Press X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 67)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 67)
8 Press ENTER.
The Setup Display for selecting the type
of video signal output from the
COMPONENT VIDEO OUT jack
appears.
If you intend to set “LINE” to “RGB” in
step 11, select “OFF.”
9 Press X/x to select if you wish to
receive progressive video signals
or not.
Select “ON” only if you have made video
connection A (page 16) and wish to
view progressive video signals.
10Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
11Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
If you set “LINE” to “RGB,” you cannot
select “COMPONENT OUT.” (The
player outputs no component video
signals.)
◆ Video signals
• VIDEO (page 67)
◆ S video signals
• S-VIDEO (page 67)
◆ RGB signals
• RGB (page 67)
12Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
SCREEN SETUP
TV TYPE:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
ON
AUTO
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
:
16:9
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
ON
VIDEO
ON
OFF
COMPONENT OUT:
MODE
(PROGRESSIVE)
:
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S-VIDEO
RGB
COMPONENT OUT:
MODE
(PROGRESSIVE)
:
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
,continued