Filter
Top Products
3-2 Cassettes
Loading a cassette Ejecting a cassette
It is not possible to load a cassette unless the unit is
powered on.
Ejecting a cassette
Loading a cassette
1 Turn the POWER switch on.
2 Raise the lid of the cassette compartment.
3 Check that the "HUMID" indication is not
showing in the status indication panel, then insert
the cassette.
For details of the procedure when the "HUMID"
indication is showing, see the section "Warning
Indications " (page A-l).
When the cassette is fully inserted, the lid of the
cassette compartment closes automatically.
1 Check that the unit is powered on.
2 Press the EJECT button.
This ejects the cassette.
3 Remove the cassette.
4 Close the lid of the cassette compartment
manually.
Ejecting a cassette when the unit cannot be
powered on
When there is no power supply, for example because
the battery pack is exhausted, to eject a cassette
manually refer to the supplied Maintenance Manual
Part 1.
3-6 Chapter 3 Getting Started