Filter
Top Products
Appendix A-15
Appendix
Items Related to Editing (300s)
The values enclosed in a box are factory settings.
301
Item number
Item Function
VAR SPEED
RANGE FOR
SYNCHRONIZATION
[0]
1
[–1to+3]
–1.15 to +3.45
Specifies the variable tape speed range when the variable
speed playback is executed by a remote control unit
connected to the REMOTE1 IN (9P) connector.
0 : –1 to +3 times normal tape speed
1 : –1.15 to +3.45 times normal tape speed
Note
When an editing control unit such as BVE-9000 is
connected for DT editing, select “1”.
When “1” is selected and the DT playback at a speed
exceeding –1 to +3 times nomal tape speed is attempted
during analog Betacam playback, the bottom of the picture
may partially disappear. This is not a malfunction.
Settable range
302
[0]
1
0
[1]
[deceleration]
acceleration
(DVW-A500/1 and
500/1)
deceleration
[acceleration]
(DVW-A500P/1 and
500P/1)
Specifies whether capstan servo is re-locked in
deceleration mode or acceleration mode when the ALT/[F5]
(CAP LOCK) button in the HOME menu is set to 4FD
(DVW-A500/1 and 500/1) or 4FD or 8FD (DVW-A500P/1
and 500P/1) .
0 : Capstan servo re-locks in deceleration mode.
1 : Capstan servo re-locks in acceleration mode.
CAPSTAN
RE-LOCKING
DIRECTION
304
EDIT FIELD
SELECT
[0]
1
2
[1F]
2F
1F/2F
Specifies the timing for the start of editing in an edit mode.
0 :
Tape editing starts from field 1 and ends at field 2.
1 :
Tape editing starts from field 2 and ends at field 1.
2 :Tape editing is carried out according to the timing of
commands.
305
SYNC GRADE
[0]
1
[accurate]
rough
Specifies the editing accuracy when performing editing in
phase-synchronized mode when the item 004 is set to “0”.
0 :Editing accuracy of ±0 frame
1 :Editing accuracy of ±1 frame
For details on item 004, refer to page A-8.
[00]
01
02
03
04
05
06
07
08
09
10
11
12
13
306
DMC INITIAL
SPEED
Specifies the initial tape speed that is set automatically
during DMC (Dynamic Motion Control) editing.
00 : The initial tape speed is determined by the rotation
angle of the search dial.
01 : Normal playback speed
02 : Tape is stopped.
03 to 13 : The initial tape speed is the selected search
speed.
[manual]
play
still
+0.03
+0.1
+0.2
+0.5
+1
+2
–0.03
–0.1
–0.2
–0.5
–1