Filter
Top Products
Menu List
A-24 Appendix
Appendix
703
(DVW-A500/1
and 500/1)
Function
In E-E mode, the video output signal is delayed with
respect to the input signal by a duration equal to the time
required for video circuit processing (6H). This item
specifies whether the sync signal is delayed by the same
amount as the video output signal, or is output with the
same timing as the input signal when outputting video
signal with the sync signal.
0: Sync signal is delayed.
1: Sync signal is not delayed.
Item number
Items Related to the Video Control (700s)
The values enclosed in a box are the factory settings.
Item
[0]
1
SELECTION OF
VIDEO/SYNC
DELAY
701
[syncdelay]
video delay
BLANK LINE
SELECT
Specifies whether blanking is on or off during the vertical
blanking of the video signal.
The lines that are blanked can be individually specified.
The Y/C signal and ODD/EVEN field are blanked
simultaneously.
Settable range
Sub item
All Line
0
0: Blanking is specified for each line.
1: All lines selectable by this menu item are blanked, no
matter what the other sub item settings are.
2: All lines selectable by this menu item are not blanked, no
matter what the other sub item settings are.
[0]
1
2
[–––]
blank
throu
0: Blanked
2: Not blanked
12
I
19
[0]
2
[blank]
throu
Line 20
0: Blanked
1: Half-blanked
2: Not blanked
Note
For analog Betacam VTRs (i.e., Betacam SP):
Blanking can be specified for lines 12 to 20. The chroma
signal, however, is automatically blanked for lines 12 to 15
(even if blanking of the luminance signal is cancelled).
[0]
1
2
[blank]
half
throu
20
Line 12
I
Line 19
BLANK LINE
SELECT
703
(DVW-A500P/1
and 500P/1)
Specifies whether blanking is on or off during the vertical
blanking of the video signal.
The lines that are blanked can be individually specified.
The Y/C signal and ODD/EVEN field are blanked
simultaneously.
Sub item
All Line [0]
1
2
[–––]
blank
throu
0
0: Blanked
2: Not blanked
[0]
2
[blank]
throu
9
I
22
Line 23
[1]
2
[half]
throu
23
1: Half-blanked
2: Not blanked
Notes
• For digital Betacam VTRs:
Blanking can be specified for lines 9 to 23. Line 23,
however, is half-blanked.
• For analog Betacam VTRs (i.e., Betacam SP):
Blanking can be specified for lines 12 to 21. The chroma
signal, however, is automatically blanked for lines 12 to
15 (even if blanking of the luminance signal is cancelled).
Line 23 is half-blanked.
Line 9
I
Line 22
0: Blanking is specified for each line.
1: All lines selectable by this menu item are blanked, no
matter what the other sub item settings are.
2: All lines selectable by this menu item are not blanked, no
matter what the other sub item settings are.