Sony DVW-A500P/1 DVR User Manual


 
4-3 TC Menu
4-18 Chapter 4 Menu Settings
Chapter 4 Menu Settings
4-3 TC Menu
The TC menu allows you to set time code-related
items through a single menu.
The HOME, TC, PF1 and PF2 menus show
information that includes the VTR operation mode,
time code of the current position, and the time code
type, etc.
To activate the TC menu
Press the TC button.
To change the TC menu page
Press the ALT button.
Information shown in the HOME, TC, PF1 and PF2 menus
VITC: Time code type (LTC/VITC)
TCR: Time data type
(CTL/TCR/UBR/TCG/UBG/DUR)
DF: This appears when drop frame mode data is
being recorded or played (DVW-A500/1 and
500/1 only).
F1: Field number (F1/F2)
For details on operation modes, refer to “4-2 HOME
Menu” on page 4-13.
TC menu
Button
[F1]
[F2]
[F3]
[F4]
[F5]
[F6]
[F7]
[F8]
[F9]
TIMER SEL
TIMER RESET
TIMER SET
TIMER HOLD
TC SEL
TCG SOURCE
TCG MODE
RUN MODE
DF/NDF (DVW-
A500/1 and 500/1
only)
Function
Selects time data type.
Resets the time counter.
Sets the time data.
Holds the time counter.
Sets the time code reader.
Selects the internal/external time code generator.
Selects the running mode of the time code.
Selects drop frame mode.
Sets the time code generator.
Indication
[F10]
ALT/[F1]
ALT/[F2]
ALT/[F6]
VITC
TAPE TIMER
ID PRESET
CHARA SUPER
Specifies recording of VITC.
Selects the CTL display mode.
Specifies ID preset.
Specifies superimposition of character information.
ALT/[F7] CHARA H-POS Changes the superimposition position (horizontal).
Settings
CTL, TC, UBIT
on, off
VITC, AUTO, LTC
int, ext
regen, prst
free, rec
DF, NDF
on, off
+/–12H, 24H
on, off
on, off
0 to 24 (DVW-A500/1 and 500/1)
0 to 22 (DVW-A500P/1 and
500P/1)
ALT/[F8] CHARA V-POS Changes the superimposition position (vertical).
0 to 6A (DVW-A500/1 and 500/1)
0 to 81 (DVW-A500P/1 and
500P/1)
ALT/[F9] VITC POS-1
12 to 20 (DVW-A500/1 and 500/1)
(9 to 22 (DVW-A500P/1 and
500P/1)
Specifies the VITC insertion line.
ALT/[F10] VITC POS-2
12 to 20 (DVW-A500/1 and 500/1)
(9 to 22 (DVW-A500P/1 and
500P/1)
ÅIN 00:00:00:00 ÅOUT 00:00:00:00
LOCK
DOLBY
NR
TIMER
SEL
TC
CH.COND
GREEN
DIGITÅL
TC
TCR VITC INTRP DF 4FD F1
IN 00:00:00:00 OUT 00:00:00:00
01
Ó
04
µ
58
ß
00
ƒ
TIMER
RESET
TIMER
SET
TIMER
HOLD
off
TC
SEL
VITC
TCG
SOURCE
int
TCG
MODE
prst
RUN
MODE
rec
DF/NDF
DF
VITC
on
INTRP (interpolation): This appears when time
code cannot be read correctly and correction
has been performed.
Data entry window
AIN: Time data for an AUDIO IN point
AOUT: Time data for an AUDIO OUT point
IN: Time data for an IN point
OUT: Time data for an OUT point