Sony DVW-A500P/1 DVR User Manual


 
Menu List
A-42 Appendix
Appendix
K44
Item number Settable range
Function
CUE MENU
DEFAULT MODE
SEL
Item
[0]
1
Selects the default mode to be activated when you activate
the CUE menu.
0: PAGE mode
1: EXTEND mode
CUE MENU PRE-
ROLL OFFSET
K45
[0]
1
I
30
[0sec]
1 sec
I
30 sec
Specifies the preroll time to a cue point.
You can set a preroll time of 0 to 30 seconds in 1-second
units.
Selects the menu to be activated automatically when you
turn on the power.
POWER-ON
MENU SELECT
K46 [0]
1
2
3
4
[HOMEmenu]
TC menu
CUE menu
PF1 menu
PF2 menu
[pagemode]
extend mode
Item assignable to PF1 and PF2 menus are items 001
to 910, K1 to K46 which are included in the VTR
SETUP menu, and K61 to K76 described below. They
all appear in the PF ASSIGN menu.
Item K61 to K76 does not appear in the VTR SETUP
menu, and the settings of these items return to their
factory settings when you turn the power off.
K61
Item number
Function
ASSEMBLE
Item
Selects assemble editing.
INS TC
K62
Selects the insert channel(s) for insert editing.
INS VIDEO
K63
INS A-CH1
K64
INS A-CH2
K65
INS A-CH3
K66
INS A-CH4
INS A-CH CUE
K68
K67
K69 FREEZE
A still-picture is output when you press the function button which this item is registered.
K70 DMC Register this item to a function button in the PF1/2 menu and press the button to
record, automatically play and automatically edit a signal played back at speed
between –1 to +3 times normal playing speed.
LAST EDIT
K73
TIMER RESET
K74
Resets the internal time code generator.
CTL: The time data display becomes 00H00M00S00F and all edit points are erased.
TC or UBIT: The time data display becomes 00H00M00S00F (TC) or 00 00 00 00
(UBIT). Edit points are not affected.
TIMER SET
K75 Register this item to a function button in the PF1/2 menu and press the button to set
the desired time code or user bits.
TIMER HOLD
K76 Register this item to a function button in the PF1/2 menu and press the button to stop
advancing the time data.
K71
P-PLAY