Filter
Top Products
17
SETUP Setup SETUPSETUP SETUPSETUP
Notes on Using This Connection
To Do This ... Do This ...
Switch the TV’s input
between the cable and
antenna
Press ANT to switch back and forth between the TV’s VHF/UHF and AUX
inputs.
Receive channels using an
antenna, instead of the cable
1 Press ANT to switch to the AUX input.
2 Set the Cable option to Off. For details, see “Selecting Channel Options”
on page 72.
3 Run the Auto Setup program, as described in “Using Auto Setup” on
page 38.
34XBR.book Page 17 Friday, February 7, 2003 4:03 PM