Filter
Top Products
4
Remote Control
qa
POWER buttons Press to turn on and off the TV and other audio/
video equipment you have programmed into the
remote control. For instructions, see “Programming
the Remote Control” on page 5.
qs
FUNCTION buttons Press to select the equipment (VCR/DVD, SAT/
CABLE, TV) that you want to operate with the
remote control. The indicator (LED) lights up
momentarily when pressed to show which device
the remote control is operating.
qd VCR/DVD
(operating)
Press to operate your VCR or DVD. The VCR or
DVD must be programmed into the remote control.
For instructions, see “Programming the Remote
Control” on page 5.
and
(to record)
Press the button and the button at the same
time to record programs with your VCR. The
remote control must be programmed before you
can use REC.
m Rewind.
M Fast-forward.
Play.
x Stop.
X
Pause. Press again to resume normal playback.
qf
TV/VIDEO Press to cycle through available video inputs.
qg
DISPLAY Press once to display the current time (if set) and
the program status such as channel number,
Channel Label (if set), video input, Video Label (if
set), and Info Banner (if set). Press again to turn off
the display.
qh
MTS/SAP Press to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio
Program), and Mono.
qj
and
ENTER
Press to change channels. The channel changes after
two seconds.
qk
GUIDE Press to display the program guide of your satellite
receiver.
ql
Press the arrow buttons to move the cursor in the
on-screen menus. Press the center button to select
an option.
To use Favorite Channels, exit all menus and press
. Press
F or f to move the cursor to the desired
channel number and press . See “Favorite
Channels” on page 31 for details.
w;
MENU Press to display the on-screen menu. Press again to
exit the menu at any time.
wa
CH (channel)
Press to change channels. To scan rapidly through the
channels, press and hold down the CH+ or CH- button.
✍ If you lose your remote control, see page 42.
Button Description
0 9