Filter
Top Products
68
8-2 Function Menu Item List
Chapter 8 Function Menu
P06: EDIT
This is a function menu page for executing the functions
about the editing operation.
P07: E.PRESET
This is a function menu page for setting items relating to
edit preset.
P08: AUD INP
This is a function menu page for setting items relating to
audio input.
8-2-2 Non-User-Definable Function
Menu Pages (P100 to P118)
No functions can be changed in the function menu pages
described in this section.
P100: AUD MONI
This is a function menu page for making audio monitor
output settings.
a) For HDCAM and Digital Betacam tapes.
b) For MPEG IMX tapes.
P101: AUD MONI (sub)
This is a sub page for making MPEG MIX audio monitor
output settings.
Item Setting
F1 (AUTOEDIT) AUTO EDIT function
F2 (PREVIEW) AUTO EDIT PREVIEW function
F3 (REVIEW) AUTO EDIT REVIEW function
F4 (DMC) DMC function
F5 (PREROLL) Preroll function
F6 (R/P SEL) External control mode (recorder/ player)
selection
F7 (AUD IN) Audio edit IN point functions
F8 (AUD OUT) Audio edit OUT point functions
F9 (IN) Edit IN point functions
F10 (OUT) Edit OUT point function
Item Setting
F1 (REC INHI) Specify whether to inhibit recording to
tape.
ON (ALL/CRASH/VIDEO/AUDIO): Inhibit
recording to tape depending on the
setting in setup menu item 310.
OFF: Do not inhibit recording to tape.
F2 (INS TC) Edit preset setting for timecode track
F3 (INS CUE) Edit preset setting for CUE track
F4 (EDIT) Jump to P06: EDIT (editing control page).
F5 (ASSEMBLE) Assemble edit preset setting
F6 (INS VID) Edit preset setting for video track
F7 (INS A1) Edit preset setting for A1 track
F8 (INS A2) Edit preset setting for A2 track
F9 (INS A3) Edit preset setting for A3 track
F10 (INS A4) Edit preset setting for A4 track
Item Setting
F1 (EMPHASIS) Specifiy whether to add audio emphasis
to analog audio input signals.
ON: Add audio emphasis.
OFF: Do not add audio emphasis.
F2 (AUD MIX) Jump to P102: AUD MIX (audio mix/swap
setting page).
F3 (AUD MONI) Jump to P100: AUD MONI (audio monitor
setting page).
F4 (MT.SCALE) Meter scale setting (FULL/FINE)
F5 (No function assigned)
F6 (AUDIO SG) Turn internal audio test signals on and off.
(Toggle ON and OFF when selected with
the ALT/DELETE button held down.)
ON: Generate internal audio test signals.
(Select the signal waveform type in
advance using setup menu item 808.)
OFF: Do not generate internal audio test
signals.
F7 (INP A1) CH1 input selection
F8 (INP A2) CH2 input selection
F9 (INP A3) CH3 input selection
F10 (INP A4) CH4 input selection
Item Setting
F1 (TRACK 1) Selection of track 1 for monitoring
F2 (TRACK 2) Selection of track 2 for monitoring
F3 (TRACK 3) Selection of track 3 for monitoring
F4 (TRACK 4) Selection of track 4 for monitoring
F5 (TRCK CUE)
Selection of CUE track for monitoring
a)
(TRCK CHG)
Track selection change
b)
(To TRACK 5,
6, 7 or 8)
F6 (No function assigned)
F7 (No function assigned)
F8 (No function assigned)
F9 (MONI CH) Selection of monitor output channel
operation
F10 (RETURN) Return to P08: AUD INP
Item Setting
F1 (TRACK 5) Selection of track 5 for monitoring
F2 (TRACK 6) Selection of track 6 for monitoring
F3 (TRACK 7) Selection of track 7 for monitoring
Item Setting