Filter
Top Products
99
9-4 Items in the Extended Setup Menu
Chapter 9 Setup Menus
931 DOWN CONVERTER
LETTER BOX MODE
(Invalid in 24PsF or
23.98PsF mode)
Select the aspect ratio of the downconverter output when menu item 930 is set to
“l-box”.
16:9
: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
932 H CROP POSITION (DC)
(Invalid in 24PsF or
23.98PsF mode)
Adjust the “H-crop” (the horizontal position when cropping in the edge crop mode)
of the downconverter output when menu item 930 is set to “crop”.
–120 to 0
to 120
934 CROSS COLOR (DC)
(Invalid in 24PsF or
23.98PsF mode)
Adjust the downconverter cross color.
0 to 8
to 15
935 DETAIL GAIN (DC) (Invalid
in 24PsF or 23.98PsF
mode)
Adjust the downconverter image enhancer. Adjust the sharpness of edge
enhancement.
0 to 20H to 7FH
936 LIMITER (DC) (Invalid in
24PsF or 23.98PsF mode)
Adjust the downconverter image enhancer.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
937 CRISP THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode)
Adjust the downconverter image enhancer. Set the threshold amplitude at which
low amplitude signals are not emphasized.
0
to FH
938 LEVEL DEPEND
THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode)
Adjust the downconverter image enhancer. Set the luminance range for edge
enhancement.
0 to 8
to FH
939 H DETAIL FREQUENCY
(DC) (Invalid in 24PsF or
23.98PsF mode)
Adjust the downconverter image enhancer. Set the center frequency for edge
enhancement.
2.6MHz to 3.4MHz to 3.9MHz to 4.6MHz
940 H/V RATIO (DC) (Invalid in
24PsF or 23.98PsF mode)
Adjust the downconverter image enhancer. Set the horizontal/vertical ratio for
edge enhancement.
0 to 3
to 7
941 GAMMA LEVEL (DC)
(Invalid in 24PsF or
23.98PsF mode)
Adjust downconverter image enhancer. Adjust the slope of the correction curve.
0 to 80H to 100H
942 V FILTER SELECT (Invalid
in 24PsF or 23.98PsF
mode)
Set the vertical interpolation filter coefficient for downconverter output.
The vertical resolution increases as the larger value is selected.
1
to 3
943 CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode)
Set the cross color crisp level for downconverter output.
0 to 4 to FH
950 UP CONVERTER MODE
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Select the upconverter mode.
crop
: Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
951 H CROP POSITION (UC)
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Adjust the “H-crop” (the horizontal position when inserting in edge crop mode) of
the upconverter output when menu item 950 is set to “crop”.
–120 to 0
to 120
952 LETTER BOX POSITION
(UC) (HDW-D1800 only.
Invalid in 24PsF or
23.98PsF mode)
Adjust the vertical position cropped in the letter box mode for upconverter output
when menu item 950 is set to “l-box”.
–120 to 0
to 120
Menu items in the range 900 to 999, relating to digital processing (Continued)
Item number Item name Settings