Filter
Top Products
78
9-3 Items in the Basic Setup Menu
Chapter 9 Setup Menus
009
c)
CHARACTER TYPE Determine the type of characters such as timecode output from the COMPOSITE
VIDEO OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER) connector, or
HDSDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor.
WHITE: White letters on a black background
BLACK: Black letters on a white background
W/OUT: White letters with black outline
B/OUT: Black letters with white outline
011
c)
CHARACTER V-SIZE Determine the vertical size of characters such as timecode output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, SDI OUTPUT 3 (SUPER)
connector, or HDSDI OUTPUT 3 (SUPER) connector for superimposed display on
the monitor.
x1
: Standard size
x2: 2 times the standard size
013 SYSTEM FREQUENCY
SELECT
Determine whether to enable switching of the system frequency among 59.94i,
50i, 29.97PsF, 25PsF, 24PsF and 23.98PsF.
OFF
: Disable switching.
ON: Enable switching.
When “ON” is selected, the menu display changes to allow switching of the
setting among 59.94i, 50i, 29.97PsF, 25PsF, 24PsF and 23.98PsF.
For the procedure for switching the system frequency, see page 75.
Note
For the basic and extended setup menus, settings are saved for 59.94i, 29.97PsF,
23.98PsF mode and the other for 50i, 25PsF, 24PsF modes separately. When you
switch systems, all menu items change to the current menu values of the selected
mode. (These are different from the settings for the mode before switching.)
023 LOCAL KEY MAP When “MAP” is selected in setup menu item 006 and the unit is controlled from
another device, you can select the operable buttons on the control panel from the
following sub-items.
The settings of each sub-item are as follows.
DIS
: Disable the buttons.
ENA: Enable the buttons.
Sub-item
1 STOP Select whether to enable or disable the STOP button.
2 PLAY Select whether to enable or disable the PLAY button.
3 REC Select whether to enable or disable the REC button.
4 STANDBY Select whether to enable or disable the STANDBY button.
5 EJECT Select whether to enable or disable the EJECT button.
6 JOG Select whether to enable or disable the JOG button.
7 SHUTTLE Select whether to enable or disable the SHUTTLE button.
8 VAR Select whether to enable or disable the VAR button
9 FF/REW Select whether to enable or disable the F FWD and REW buttons.
10 F-KEY Select whether to enable or disable the function selection buttons (F1 to F10) and
audio level control knobs.
11 P-KEY/DISPLAY Select whether to enable or disable the menu page selection buttons (P1 to P5)
and DISPLAY button.
029 STORED OWNERSHIP Select whether to set the UMID item Stored Ownership.
off
: Do not set.
on: Set.
To set Stored Ownership, display this item in the menu display, and select F9
(SET) to move to the Stored Ownership setting screen.
For details, see the section “To set Stored Ownership” (page 60).
B01 RECALL BANK 1 Set to “ON” to recall menu settings from menu bank 1.
Item number Item name Settings