Filter
Top Products
Chapter 10
Setup Menus
Chapter 10
Setup Menus 10-15
Item number Item name Settings
310 REC INHIBIT Select the conditions under which recording is inhibited when F5 (RECINH) is set
to ON in function menu page 4.
[ALL]: All tape recording is inhibited.
CRASH: Normal tape recording is inhibited. Select this setting when you wish to
carry out assemble editing.
VIDEO : Inhibit recording of video and CTL signals.
AUDIO : Inhibit recording of audio and CTL signals.
Note
When F5 (RECINH) is set to ON in function menu page 4, the REC INHI indicator
on the lower control panel lights. If an operation inhibited by this item is
attempted, the REC INHI indicator flashes.
311 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH1
When using an editor (PVE-500, BVE-600, etc.) or a remote controller which
cannot control digital audio edit preset, select how to activate edit preset of each
digital audio channel (channels 1 to 4, and cue) on this unit using the analog
audio edit preset function of the editor or remote controller.
Set edit preset of each digital audio channel of this unit on or off according to the
analog audio preset specified by the remote controller or editor.
NODEF: No definition.
CH1: Follow edit preset of analog channel 1.
CH2: Follow edit preset of analog channel 2.
CH1+2: Follow edit preset of analog channel 1 or 2.
The default settings for each item are as follows:
311 :[CH1]
312 :[CH2]
313 :[NODEF]
314 :[NODEF]
315 :[NODEF]
309 SERVO/AV REFERENCE
SEL
Select the servo reference signal.
[AUTO1]: During recording, the input video signal is used as the servo reference
signal. During playback, the signal selected by the function menu item
OUTREF is used as the servo reference signal. If the signal selected by the
OUTREF setting is not connected, an internal reference signal is used.
AUTO2: When the function menu item OUTREF is set to REF, and any of the
ASSEMBLE, VIDEO, AUDIO CH1 to CH4, CUE and TC buttons is lit, the
reference signal for video/audio signal processing is locked to the input video
signal.
EXT: The servo reference signal is forced to be “EXT” (an external reference
video input signal is used).
312 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH2
313 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH3
314 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH4
(Continued)
315 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CUE
Menu items in the range 300 to 399, relating to editing operations (Continued)