Sony HDW-S2000 VCR User Manual


 
11-2
Chapter 11
Maintenance and Inspection
Chapter 11
Maintenance and Inspection
This unit is equipped with a self-diagnosis function,
and if a problem is detected, displays an error message
in the time data display and on the monitor.
If an error message appears, contact your Sony service
representative.
Indications in the time data display
If a problem is detected, the ALARM indicator in the
lower control panel lights, and an error message and
error code appear in time data display area 1.
Indications on the monitor
The error message and code also appear superimposed
on a monitor connected to the COMPOSITE VIDEO
OUTPUT 3 (SUPER) connector, HDSDI OUTPUT 3
(SUPER) connector, or SDI OUTPUT 3 (SUPER)
connector. Depending on the error code, an indication
of the source of the problem may appear as a
secondary error message.
ERROR-01
REEL TROUBLE-1
Z
ALARM indicator
Error message displays
To display error messages and codes superimposed
on the monitor, set the CHARA in function menu
page 4 to ON.
Some error messages have no associated error codes.
In this case, they appear in the time data display.
Error messages with error codes are saved in non-
volatile memory as an error log.
In some cases the error message is slightly different
on the monitor and in the time data display.
Time data display area 1
11-3 Error Messages