Filter
Top Products
Getting Started
9
Connecting the VCR
filename[010get.fm] model name1[SLV-SE250B] model name2[SLV-SE450B]
[3-868-346-E2 (1)]
If your TV has a PERITEL connector
Note
• If the TV is connected to the LIGNE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
ANTENNE SORTIE connector (see page 13).
1
Disconnect the aerial cable from your
TV and connect it to ANTENNE
ENTREE on the rear panel of the
VCR.
2
Connect ANTENNE SORTIE of the
VCR and the aerial input of your TV
using the supplied aerial cable.
3
Connect LIGNE-1 (TV) on the VCR
and the PERITEL connector on the
TV with the optional PERITEL cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press
t
TV/
MAGN to display the MAGN
indicator in the display window.
4
Connect the mains lead to the mains.
Mains lead
i LIGNE-1
(TV)
ANTENNE
ENTREE
PERITEL
to mains
Aerial cable (supplied)
ANTENNE
SORTIE
: Signal flow
PERITEL cable (not supplied)
ANTENNE ENTREE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
continued
010COV.book Page 9 Friday, April 14, 2000 1:07 PM