Filter
Top Products
Restore User Setting
This setting allows for the selection of allowing user settings for CC to be stored between
power cycles, or to always use a default setting on power on. Select YES to override the
previous user CC setting on power on, or select NO to allow the previous user setting to
be used on the next power on.
Captioning
This setting allows an ON or OFF setting for CC as a default power on status.
Digital Captioning Mode
This setting allows the selection of the CC mode to be used for the Digital Channels
Analog Captioning Mode
This setting allows the selection of the CC mode to be used for the Analog Channels
V-Chip Setup
This submenu sets up default options for the V-Chip settings.
Restore User Setting
This setting allows for the selection of allowing user settings for V-Chip to be stored
between power cycles, or to always use a default setting on power on. Select YES to
override the previous user V-Chip setting on power on, or select NO to allow the previous
user setting to be used on the next power on.
V-Chip Menu Item
This setting controls whether the user has access to the V-Chip selection and settings.
Selecting YES will allow the V-Chip menu item to appear on the user menu. Selecting NO
will cause the V-Chip settings to no be user accessible and they will not appear on the
user menu.
Reset Access Code
This is an open setting to allow for the reset of the code. In set up mode, this code can be
overwritten without knowing the previous code. This is useful incase the previous user
forgot the code. The code will be reset to the default code of 0000
20
Copyright 2007 – Enseo, Inc.
12