Filter
Top Products
Change Access Code
The V-Chip Access Code can be set through the set up process using this
function.
Service Menu
The HD tuner is an advanced media device with the ability of communicating through an RF
network to maintain updated firmware and control. The features outlined below are advanced
functions designed for an integrated RF system.
This menu area is used to set up parameters for servicing the tuner or performing service
functions.
Update Channel
This feature is used for setting a channel to perform firmware updates. Using the numeric
keys on the remote, enter the channel that has been identified by your system
administrator for firmware updates.
Allow Update Searching
This YES / NO selection either allows or prohibits the display from searching for an
update channel for firmware updates. Having this selected as YES will allow updates
when the Update Channel needs to be changed for some reason.
Start Firmware Update
To manually initial a firmware update, press the Right arrow button on the remote from
this menu line. NOTE: By selecting this item, the tuner will immediately begin the
firmware update process and reboot when complete.
Note:
During a firmware update, the Display MUST NOT be unplugged or turned off.
20
Copyright 2007 – Enseo, Inc.
14