Filter
Top Products
22
Analog Menus
KD-27/32/36FS170
2-670-362-21(1)
Using the Channel Setup Menu
Favorite
Channels
Quick access
to analog favorite
channels
Applies to analog channels only. To set up favorite digital channels, see page 31.
To set up your analog Favorite Channels list:
1
Use the V or v buttons to highlight the position (1-5) where you want to set a
favorite channel, then press .
2 Use the V or v buttons to find the channel you want to add to your favorite
channels.
3 Press to select the channel. The TV will automatically change to the selected
channel and assign it to the selected position (1-5).
4 Press B to return to the Channel Setup menu or press to exit.
Cable Use the V or v buttons to highlight one of the following options, then press
to select it.
On: Select if you are receiving cable channels with a CATV cable.
Off: Select if you are using a TV antenna.
Channel Fix Not available when in digital tuning mode.
Use the
V or v buttons to highlight one of the following options, then
press to select it.
Off: Channel Fix is not set.
2-6: “Fix” your TV’s channel setting to 2–6 (VHF/UHF input) and
use the cable box or satellite receiver to change channels.
Video 1:
Select from available video inputs when you have connected
video equipment (e.g., a satellite receiver) and you want your
TV fixed to it.
Auto Program Applies to analog channels only. To Auto Program digital channels, see page 31.
Perform Auto Program whenever setting up your TV. Auto Program will
search for available channels and program receivable channels.
Favorite Channels
Channel Fix:Off
Auto Program
Channel Show/Hide
Channel Label
Cable:On
Channel Setup
Move Select End
To access the Channel Setup Menu, use the
following steps:
To Display To Highlight To Select
Press v to highlight an option, then press .
✍ After changing the Cable setting the first time, you will need to run Auto Program. For analog
channels, see page 22. For digital channels, see page 31.
✍ You cannot use Favorite Channels, Cable, Channel Show/Hide, or Channel Label when Channel Fix is
set.