Filter
Top Products
Introducing the Sony LCD Projection TV
15
Introducing the Sony LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
Notes on the LCD
Projection TV
To enjoy clear pictures
❑
Prevent sunlight or other light sources from shining.
❑ The screen surface is easily scratched. Do not rub, touch, or tap it with a
sharp or abrasive object (see “Cleaning the Screen Surface” below).
On moisture condensation
❑
If your LCD projection TV is moved directly from a cold to a warm
location, is placed in a humid room, or if the room temperature changes
suddenly, the picture may blur or show poor color. This is caused by
moisture condensation on the lenses inside. If this happens, leave the
power on to help the moisture evaporate. When the condensation has
evaporated, the picture of your LCD projection TV will return to
normal.
When not using the LCD Projection TV for a long period of time
❑
Turn off the main power on the front of your LCD projection TV before
going to sleep or going out. Unplug the AC power cord from the outlet if
you anticipate not using the LCD projection TV for more than a week.
When turning off the power
❑
The fan will continue to operate for about two minutes. Allow several
minutes before unplugging from the outlet or switching the breaker off.
Before carrying the LCD Projection TV
❑
Before carrying, unplug the power cord and disconnect all cables.
See page 28 for instructions on how to carry your LCD projection TV.
Cleaning the Screen
Surface
To remove dust on the screen, wipe with soft cloth.
✍ Do not use any type of abrasive pad, alkaline cleaner, scouring powder,
window cleaners or solvent such as alcohol or benzene. Using these
types of products may damage the screen.
✍ To clean the screen, use the cloth lightly moistened with a mild detergent
and water solution. Use gentle pressure when cleaning.
01COV.book Page 15 Thursday, February 17, 2005 8:01 PM