Filter
Top Products
Setting Up the LCD Projection TV
53
Setting Up the LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
When connecting to the Digital Satellite Receiver’s DVI-HDTV connector
If you are connecting to a digital satellite receiver with DVI-HDTV output,
you can connect to the LCD projection TV’s HDMI IN jack by using an
HDMI-to-DVI cable or an adaptor (both not supplied).
1 Using a HDMI cable (not supplied), connect the digital satellite
receiver’s DVI-HDTV OUT jack to the LCD projection TV’s HDMI IN
jack.
Use the HDMI IN 7 input connection.
2 Using an audio cable, connect the digital satellite receiver’s AUDIO
OUT jacks to the LCD projection TV’s AUDIO IN jacks.
✍ The DVI-HDTV VIDEO jack does not provide audio, so audio cables must
be connected to provide sound when an HDMI to DVI-HDTV adapter (not
supplied) is used.
VHF/UHF CABLE
R L
AUDIO IN
S VIDEO
VIDEO
AUDIO
L
(MONO)
R
VIDEO IN
134
7
Rear of LCD projection TV
HDMI-to-DVI adapter or
cable (not supplied)
Audio cable
(not supplied)
Digital satellite receiver
AUDIO-R (red)
AUDIO-L (white)
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
01COV.book Page 53 Thursday, February 17, 2005 8:01 PM