Sony KDL-20G30xx Flat Panel Television User Manual


 
29
GB
Additional Information
Specifications
Display Unit
Power Requirements:
220–240 V AC, 50 Hz
Screen Size:
20 inches
Display Resolution:
640 dots (horizontal) × 480 lines (vertical)
Power Consumption:
50 W or less
Standby Power Consumption*:
0,7 W or less
* Specified standby power is reached after the TV
finishes necessary internal processes.
Dimensions (w × h × d):
Approx: 592 x 440 x 223 mm (with stand)
Approx: 592 x 428 x 96 mm (without stand)
Mass:
Approx: 9,0 kg (with stand)
Approx: 8,0 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
Depending on your country/region selection
Analogue: B/G/H, D/K, L, I
Digital: DVB-T
Colour/Video System
Analogue: PAL, SECAM
NTSC 3.58, 4.43 (only Video In)
Digital: MPEG-2 MP@ML
Aerial
75 ohm external terminal for VHF/UHF
Channel Coverage
Analogue: 48.25 - 855.25 MHz
Digital: VHF Band III (177.5 - 226.5 MHz)
UHF E21 - E69 (474 - 858 MHz)
Terminals
/1
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, and TV audio/video
output.
/ 2 (SMARTLINK)
21-pin Scart connector (CENELEC standard) including
audio/video input, RGB input, selectable audio/video
output, and SMARTLINK interface.
3
Supported formats: 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3V negative sync
P
B/CB: 0.7 Vp-p, 75 ohms
P
R/CR: 0.7 Vp-p, 75 ohms
3
Audio input (phono jacks)
500 mVrms
Impedance: 47 kilo ohms
4 S video input (4-pin mini DIN)
4 Video input (phono jack)
4 Audio input (phono jacks)
Audio output (Left/Right) (phono jacks)
i Headphones jack
CAM (Conditional Access Module) slot
Sound Output
3 W + 3 W (RMS)
Optional Accessories
Wall-Mount Bracket SU-WL100.
Design and specifications are subject to change without
notice.
Additional Information
010COV.book Page 29 Thursday, September 13, 2007 10:42 AM