Filter
Top Products
5
GB
Start-up Guide
3 Place the TV set on the stand. Take care
not to interfere with cables.
4 Check the stopper to make sure the TV set
is correctly fixed to the stand.
5 Take out the screws from the accessory
bag.
6 Fix the TV to the stand using the supplied
screws.
~
If using an electric screwdriver, set the tightening torque at
approximately 2 N·m (20 kgf·cm)
3: Connecting an aerial/
VCR/ DVD recorder
Stopper
Connecting an aerial only
Connecting an aerial/ VCR/ DVD recorder
Coaxial cable
Scart lead
VCR
Coaxial cable
Coaxial cable
Continued
010COV.book Page 5 Thursday, September 13, 2007 10:42 AM