Filter
Top Products
12
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by
matching e and E on the batteries to the
diagram inside the battery compartment of
the remote control.
Initial Setup
The Initial Setup screen appears when you turn on the TV for the first time.
During this initial setup, you can perform the following:
1 Select the language for the on-screen display text.
2 Select HOME or Retail mode.
3 Connect cable or antenna, then select OK to run Auto
Program.
~
• If you have cable and antenna available, please connect
cable first.
• IMPORTANT:
Auto Program
process is only effective when cable or antenna is connected.
If you cancel
Auto Program
before completion some channels may not be available.
4 Auto Program will scan for available channels from the signal source directly connected to
the TV’s CABLE/ANTENNA input and may take sometime to complete the process. Follow
the help text provided on the screen to run Auto Program.
Push to
open
Please select your language:
Initial Setup
Set
• When prompted to select HOME or Retail, be sure to select
HOME for ENERGY STAR compliant mode.
• If you use both cable without a box and antenna connections, use an
A-B RF switch (not supplied). For more details, see the online
Reference Book.
• Select your preferred aspect ratio for the screen display. Press
WIDE to select the wide mode or press MENU and set the Auto
Wide to On under the Screen menu.
• To change the clock, press MENU and go to Setup menu then
select Clock/Timers and adjust Current Time.
Initial Setup
Please select the type of use for this TV.
Home
Retail
“Home” optimizes the picture for normal home use.
“Retail” optimizes the picture for store display.
Set