Sony KDL-40U40xx Flat Panel Television User Manual


 
28
GB
Features
Quick Start The TV turns on faster than usual within two hours after switching to standby
mode. However, power consumption in standby mode is higher than usual.
Power Saving Reduces power consumption of the TV by adjusting the backlight.
When you select “Picture Off”, the picture is switched off, and the (Picture Off)
indicator on the TV front panel lights up in green. The sound remains unchanged.
Film Mode Provides improved picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
Auto Provides smoother picture movement than the original film-
based content. Use this setting for standard use.
Off Turns off the “Film Mode”.
~
• If the image contains irregular signals or too much noise, “Film Mode” is
automatically turned off even if “Auto” is selected.
Video/Photo Sets the image quality setting most suited to the input source (video or photograph
data).
Video-A Sets suitable image quality, depending on the input source,
video data or photograph data when directly connecting Sony
HDMI output-capable equipment that supports “Video-A”
mode.
Video Produces suitable image quality for moving pictures.
Photo Produces suitable image quality for still images.
~
• If the connected equipment does not support Video-A mode, the setting is
automatically set to “Video”, even if you select “Video-A”.
“Video/Photo” is available only for HDMI or component input source (1080p and
1080i).
Timer Settings Sleep Timer Sets the TV to automatically switch to standby mode after a
certain amount of time.
When “Sleep Timer” is activated, the (Timer) indicator on
the TV front panel lights up in orange.
z
When you turn off the TV and turn it on again, “Sleep
Timer” is reset to “Off”.
A notification message appears on the screen one minute
before the TV switches to standby mode.
On Timer
Settings
On Timer Sets the TV to automatically turn on from
standby mode.
Timer Mode Sets the day(s) of the week you want the
timer to turn on the TV.
Time Sets the time you want the timer to turn
on the TV.
Duration Sets how long you want the TV to stay on
before switching to standby mode again.
Clock Set Allows you to adjust the clock manually. When the TV is
receiving digital channels, you cannot adjust the clock
manually, because the clock automatically receives the time
code from the broadcast signal.