Filter
Top Products
Using P&P and PIP Features
This TV comes with the P&P and PIP features
which allow you to view two pictures
simultaneously. P&P (picture and picture)
provides two windows side by side. PIP (picture in
picture) provides PC input signal and TV
channels.
• The CABLE/ANTENNAinput must beconnected to
use the P&P/PIP features.
• P&P is not available with 1080124pvideo format.
• Closed Captions (CC) is availablewith P&P (see
page 38).
P&P
Main Window
Window
• To swap audio in P&P mode, use the _,1,_button to
swapthe highlightbetween the Main Window and Sub
Window.
• To swap audio in PIP mode, press OPTIONS, then
press i'/,! to highlight Audio Swap.
• For compatible PC Timings, refer to the PC Input
Signal ReferenceChart (see page 14).
Press I./,_ to highlight the window to change for
P&P. Press */* to move the Sub Window for PIP.
• In the main window, press INPUT to select an
input to watch.
• In the sub window, change the channel by:
pressing CH+/-; entering the channel number
using the 0-9 numeric buttons; or pressing
JUMP to switch to the previously viewed
channel.
PIP
Main Window
(PC)
Sub Window
(Location of
the Sub
Window can
be moved by
pressing
tl!l*!*.)
1 Press OPTIONS while watching one of the
following inputs: TV channels, Video,
Component, HDMI or PC.
2 Press t/! to highlight P&P or PIP and press @.
!!!!!in; i !: 1!!!!!
Video 112/3
TV channel
Component 112
(CABLE/
HDMI IN 1/21314 ANTENNA)
(except PC timing)
1
2
Press OPTIONS.
Press t/! to highlight Exit P&P or Exit PIP
(depends on the mode you are in), and press
@ to exit.
• You may also press RETURN while in these features
to exit.
• Additional compatible device with TV tuner is
required to watch two simultaneous live TV programs.
PC TV channel
HDMI IN 1/2/3/4 (PC timing) (CABLE/
ANTENNA)
28