Sony KDL-26S2000, KDL-32S2000, KDL-40S2000, KDL-46S2000 Flat Panel Television User Manual


 
11
Getting Started
Getting Started
Welcome to the World of
TM
Thank you for purchasing this Sony LCD Digital Color Television. This
manual is for model KDL-26S2000, KDL-32S2000, KDL40S2000 and
KDL-46S2000. Be sure to check the supplied accesories against the list on
page 46.
Connecting the TV
To display clear crisp pictures, you must connect your TV correctly and select
the correct
Wide Mode
to display the picture in the correct aspect ratio (see
“Changing the Wide Screen Mode” on page 21). It is strongly recommended to
connect the antenna/cable input using the supplied 75-ohm coaxial cable to
receive optimum picture quality signal. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal deterioration. If
you use a 300-ohm twin lead cable, keep it as far away from the TV as
possible.
You can also connect a variety of optional equipment to your TV (see page 14).
For multiple equipment connections, please refer to the Quick Setup Guide.
Cable System or
VHF/UHF Antenna
System
Cable or VHF/UHF (or VHF only)
From
Cable
settings in
Setup
settings, select
Cable On
or
Cable Off
for your type
of input signal.
75-ohm coaxial
cable (supplied)
Rear of TV
VHF/UHF input
(Continued)