Filter
Top Products
53
Using TV Settings
If you missed the Initial Setup when you first connected the TV or if you want to scan all receivable
channels, select Initial Setup. Follow the instructions on the screen. Some settings such as Picture
Adjustments, Sound Adjustments, and Parental Lock will not be affected by this Initial Setup. If
you wish to return your TV to factory settings, please see the Troubleshooting section on
page 57.
Home Menu Scrolling Adjust the navigation speed through menu items.
Standard Select to scroll quickly with V/v buttons.
Mode 1 Select to scroll slowly with V/v buttons.
Mode 2 Select to scroll individually with repeated V/v/B/b button press.
Power Saving Reduces the power consumption by adjusting the backlight brightness. This also enhances
the black level. Select from Off, Low, High and Picture Off.
~
• While Picture Off is set, pressing VOL +/– or MUTING buttons will not disable this
function. Press other buttons to disable it.
Light Sensor Enables the automatic picture (screen) brightness control. The Light Sensor measures
the room brightness which allows the TV to automatically adjust the backlight brightness
based on the picture settings and the ambient room light conditions.
~
•
Be sure not to put anything around the sensor, as its function may be affected (see page 19).
• In low light the range of the backlight control is reduced when the Light Sensor is set
to On.
PC Power
Management
Select On to have the TV automatically enter standby mode when there is no signal input
for more than 30 seconds. The STANDBY LED on the front panel illuminates with the
On option. Select Off to disable this feature.
~
• Press POWER to exit from standby mode.
• PC Power Management is not VESA-compliant.
Logo Illumination
Select
On
to illuminate the SONY logo on the front panel or select
Off
to disable this
function.
Picture Adjustments
Lock
Select Lock to prevent the picture adjustments from being changed. To disable this
feature and allow picture adjustments, select Unlock.
Initial Setup
~
• Favorite channel list will be cleared each time you run the Initial Setup.