Filter
Top Products
105
SETUP SETUP SETUPMenus MenusSETUP
Clock/Timers
(continued)
Current Time
1 Press to select Current Time.
2 Move the joystick V and v to set the current time
(day, hour, and minute). Press (or move the
joystick
b) to confirm each setting and move to the
next setting. Move the joystick
B to go back to the
previous setting.
3 Press MENU to exit the Menu.
Flash Focus Allows you to adjust the convergence automatically. For
details, see page 42.
Convergence Allows you to fine-tune the convergence manually. For
details, see page 43.
i.LINK Standby On Allows the i.LINK signal to pass
through to connected i.LINK
devices even when the TV is
turned off. The front panel i.LINK
Standby LED shows orange. The
TV uses more standby power than
when this option is set to Off.
Off Does not allow the i.LINK signal
to pass through to connected
i.LINK devices when the TV is
turned off. The front panel i.LINK
Standby LED shows red. The TV
uses less standby power than
when this option is set to On.
Demo Runs a demonstration of on-screen Menus.
Option Description
You can also access Flash
Focus by pressing the FLASH
FOCUS button on the front
panel of the TV. For details, see
pages 14-15.
z
AX1 PJ.book Page 105 Wednesday, April 30, 2003 2:13 PM