Sony KDP-51WS550 Projection Television User Manual


 
54
SETUP SETUP SETUPFeatures SETUPSETUP
Watching TV
To Do This ... Do This ...
Activate the remote control to
operate the TV
Press TV FUNCTION
Turn on/off the TV Press TV POWER
Tune directly to a channel To tune to analog channels, press 0-9 and
then ENTER.
For digital subchannels, press 0-9, ,
press 0-9 again, and then ENTER.
For example, to select subchannel 2.1,
press 2 + + 1, and then press ENTER.
You can also select digital channels
using the digital program guide. See
page 63 for details.
Adjust the volume Press VOL +/-
Mute the sound Press MUTING (press again to unmute)
Alternate back and forth
between two channels
Press JUMP
The TV alternates between the current
channel and the last channel tuned.
Display the current channel
number (and other information)
Press DISPLAY once to display the channel
number, current time, and channel label
(if set). Press DISPLAY again to turn Display
off.
Switch the TVs input to the
VCR, DVD player, or other
connected equipment
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TVs video inputs.
Change video and audio
options, customize the TVs
setup, set parental controls, and
more
Press MENU to display the Menu. For
details, see Using the Menus on
page 91.
Switch
the TVs input between
sources connected to the TVs
VHF/UHF and CABLE inputs
Press ANT to alternate between sources
connected to the TVs VHF/UHF and
CABLE inputs.
Switch the TV's input to a
connected i.LINK device
Press i.LINK to display a list of available
i.LINK devices, and select the desired
device from the list. See page 86 for
details.
For a complete list of all
the functions of the remote
control, see pages 45-50.
z
AX1 PJ.book Page 54 Wednesday, April 30, 2003 2:13 PM