Sony KDP-51WS550 Projection Television User Manual


 
87
SETUP i.LINK SETUPSETUP SETUPi.LINK
Using the i.LINK Control Panel
After you select an i.LINK device using the Device List, the TV
displays the i.LINK Control Panel, which allows you to use the TV's
remote to control the selected i.LINK device.
1 If the i.LINK Control Panel is not already displayed, press i.LINK
on the remote control.
2 Move the remote controls joystick V v B b to navigate through
the options available in the i.LINK Control Panel.
3 Press to select a desired option.
4 Press EXIT to exit the Control Panel and view the i.LINK device
full-screen.
The i.LINK Control Panel displays the signal from the TV to the left
(if available), and the signal from the currently selected device to the
right.
If i.LINK is pressed while the TV is displaying an analog or digital channel
(not the i.LINK device), then the Device List will appear. Select the desired
device from the list and press to display the Control Panel.
To exit i.LINK mode, select DTV from the Device List or press CH+/-.
The DTV window appears only if the
i.LINK menus were entered while
watching a digital TV channel
AX1 PJ.book Page 87 Wednesday, April 30, 2003 2:13 PM