Sony KDS-55A3000, KDS-50A3000, KDS-60A3000 Projection Television User Manual


 
15
Getting Started
Use the TV as a monitor for your PC.
Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or
HDMI output. (Refer to the separate Quick Setup Guide.)
~
Connect the PC IN jack to the PC using an HD15-
HD15 cable with ferrite core (analog RGB, not
supplied) and audio cable (page 12).
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
~
This TV’s PC input does not support Sync on Green or
Composite Sync.
• This TV’s PC VGA input does not support interlaced
signals.
• When in PC input, the edge of the picture may be
cropped, or a black frame may appear around the
picture. See page 22 to adjust the screen.
For the best picture quality, it is recommended to use
the signals (boldfaced) in the above chart with a 60 Hz
vertical frequency from a personal computer. In plug
and play, signals with a 60 Hz vertical frequency will be
detected automatically. (PC reboot may be necessary.)
PC
1
2
3
PC IN
LR
AUDIO AUDIO
RGB
HD15-HD15
cable (analog
RGB)
Audio cable
(stereo mini plugs)
Side of TV
Connect to an HDMI compatible
PC with an HDMI cable.
Resolution
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Standard
Signals Horizontal
(Pixel)
× Vertical
(Line)
VGA 640
×
480 31.5 60 VGA
640
×
480 37.5 75 VESA
720
×
400 31.5 70 VGA-T
SVGA
800
×
600 37.9 60 VESA Guidelines
800
×
600 46.9 75 VESA
XGA
1024
×
768 48.4 60 VESA Guidelines
1024
×
768 56.5 70 VESA
1024
×
768 60.0 75 VESA
WXGA
1280
×
768 47.4 60 VESA
1280
×
768 47.8 60 VESA
1280
×
768 60.3 75
1360
×
768 47.7 60 VESA
SXGA
1280
×
1024 64.0 60 VESA
1280
×
1024 80.0 75 VESA
HDTV
1920
×
1080 67.5 60