Filter
Top Products
19
Using the TV Features
Using the TV Features
Remote Control and TV Controls/Indicators
Insert two size AA batteries (supplied) by matching
e and E on the batteries to the diagram inside the
battery compartment of the remote control.
Inserting Batteries into the Remote Control
Remote Control and TV Controls
Button Description
1 DISPLAY Press once to display the information pertaining to the
channel and/or program when available. The OSD (On Screen
Display) will time out in a few seconds or press again to
immediately turn off the display. You can also set the display
to show minimal information. See Info Banner on page 43.
2 SLEEP Press repeatedly until the TV displays the time in minutes
(Off, 15min, 30min, 45min, 60min, 90min or 120min)
that you want the TV to remain on before shutting off. To
cancel Sleep Timer, press SLEEP repeatedly until Off
appears.
3
FUNCTION
Buttons
The FUNCTION button indicator lights up momentarily
when pressed to show which external equipment the remote
control is operating. When the remote control is set to operate
the external equipment, these buttons will operate the
equipment you choose. You must first press one of these
FUNCTION buttons to operate the corresponding equipment.
See page 25 for programming the remote control.
Push and slide
to open.
POWER
CHANNEL
VOLUME
INPUT
HOME
~
•The 5, PLAY and CH + buttons have a tactile dot. Use them as a reference
when operating the TV.
Buttons located at the right side of the TV will operate the same as these buttons
on the remote control.
1
2
3
(Continued)