Filter
Top Products
25
GB
Using MENU Functions
Tip
Sound menu options other than “Dual Sound” cannot be used for headphones and audio output jacks.
BBE
Gives sound more impact by compensating for phase effects in speakers using the
“BBE High Definition Sound System”, when “Sound Mode” is set to “Custom”.
To reproduce sounds with impact, select “High” (more impact) or “Low” (less
impact). Otherwise select “Off”.
Dual Sound
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select “Mono”. The sound
becomes monaural, but the noise is reduced.
• The “Dual Sound” setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when “Mono” is selected for the program
position.
• You cannot receive stereo or dual sound when “Low” or “High” is selected in “Audio Filter”
(page 32).
Tips
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand,
etc.
• If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “Main” or
“Sub”.
Broadcasting Selection
NICAM stereo Stereo (stereo sound)
Mono (regular sound)
NICAM bilingual Main (main sound)
Sub (sub sound)
Mono (regular sound)
NICAM monaural Main (main sound)
Mono (regular sound)
A2 (German) stereo Stereo (stereo sound)
Mono (regular sound)
A2 (German) bilingual Main (main sound)
Sub (sub sound)